Epoxy coating to maintance workshop

Our client asked us to install a solvent free high build epoxy coating to their maintenance area.
The current floor was a polished concrete slab.

To start we prepared the concrete slab by diamond grinding to achieve the required surface key and to remove any contaminants.

A base cost of solvent free high build epoxy was then applied.

After the base coat has cured a further two top coats of solvent free high build epoxy coating where applied.

Preparation in progress.



Completed preparation

The final top coat

To discuss how we can assist with your flooring project please contact us on the following email: darren@floorpainters.co.uk

Copyright Floor Painters Ltd 2016

Factory Walkways and crossings.

 

Our client required walkways and pedestrian crossings installing to the new factory.  The current floor was a polished concrete surface. Before we could install any epoxy resin we needed to prepare the surface. This time we used enclosed shot blasting to remove the surface layer to achieve the required surface key.

 

Shot Blasting in progress.

 







Completed preparation





 A Single coat of Epoxy Primer was then applied.





Clear Epoxy Primer.

Once the primer had cured a top coat of Solvent Free high Build Epoxy Coating with a texture additive was applied. The Texture additive will help to achieve a slip resistant surface.

 

The Finishing Touches:

The final process was the installation of the pedestrian crossings and yellow demarcation lines. We also installed hash-boxes to all fire exits.

To find a full range of our products and services please visit our website on the following link:

 

www.floorpainters.co.uk 

 

or contact us on the following email:

 

darren@floorpainters.co.uk

Copyright Floor Painters Limited 2015. All Rights Reserved.

Fleet Support Service Garage Floor Improvements

 

 Fleet Support Service Garage Floor Improvements

 

We were asked by our client to improve there fleet service garage to create a clean and safe environment for the workforce working on the vehicles. In one weekend we removed all the oil and contaminants from the concrete slab and installed a hard wearing epoxy floor coating with pedestrian walkway and safety demarcations. 

 

 

 

 

 

 

 

 

Floor Repairs and coating to Marine equipment test facility

Installation of slip resistant walkway and floor coating to Marine Test Facility

 

Our client needed there workshop floor to be improved for Health and safety, as well as cosmetic appearance. They only had a small window of opportunity for these works to be carried out, and asked us to complete the project for them.

 

The floor was first prepared using enclosed shot blasting to remove and debris and contaminants from the surface.

 

Once this was complete all repairs where carried out using epoxy resin repair.

 

All walkways were installed using MMA with a full broadcast of aggregate, before the remaining areas where coated using solvent free epoxy coating.

 

 

Before

 After

 

 

To find a full range of our products and service please visit our website on the following link: www.floorpainters.co.uk or contact us on the following email: darren@floorpainters.co.uk

red epoxy walkways with yellow border lines

 

 

 

 

 

 

 

 

Contact Us

Floor Painters Ltd

 

Based in Hull , East Yorkshire our floor installation teams cover the all of the UK .

 

From Cornwall to the Orkneys and every where in between we can get to you .

 

Without obligation we will give advice and costs for any size of project .

 

 

 

 

 

Leicestershire

 

 

Hull

Derbyshire

North Yorkshire

Lincoln 



Orkney Isles

what we do

Trip to Orkney Isles page two

 

 Don't think Peter enjoyed the ferry crossing

    Darren takes advantage of phone and internet signal

 

 



 

 Tom enjoyed his trip

 

 

Arrive in Stromness

 Stromness is the second most populated town in Orkney, Scotland. It is in the south-west of Mainland Orkney. It is also a parish, with the town of Stromness as its capital.

 

 

From Stromness we travelled to Kirkwall the biggest town and capital of the Orkney Islands, off the coast of northern mainland Scotland.

 

We then travelled to Houton to catch the ferry to the island of Flotta

 

 

 

 

 

 Island of Flotta

 

 

 

 

 

 

 

 

 

 

Epoxy Chemical Resistant coating at water test centre

The existing concrete slab had been contaminated with crude oil and sea water over many years, so to start we used diamond grinders to remove the surface.

 

Once the surface preparation was complete a primer coat of solvent free high build epoxy was applied with a full broadcast of aggregate.

 

 

Stage 3 a single coat of Water base epoxy primer was applied to seal the aggregate

 

Stage 4 A top coat of Resbuild Ultracoat chemical resistant epoxy was applied along with Yellow LMP demarcations.