Our trip to the Orkney Isles March 2015

Hello Scotland

 

From sunny forest to snow covered mountains

 

 

 

 

Beautiful Lochs

 

 

The top of Scotland we arrive at Scrabster

 

 

Goodbye Scotland on our way to Orkney Isles 

 

 

 

 

installing new epoxy coat walkways

 

 

Old flaking paint not a good impression on visitors .

 

Also a clear safe walkway is not defined at all.

 

Floor Painters Ltd can remove all this old paint using large grinders or enclosed shot blasting machines .

 

All machines are attached to industrial vacuums to remove the dust during grinding

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 Once the old paint has been removed we vacuum the area to remove any remaining dust and debris

Preparation done and two coats of solvent free high build epoxy coatings .

 

Solid bright colours complemented with yellow epoxy lines .

 

A clear safe walkway and a more pleasing site for any visitors .

Epoxy Chemical Resistant coating at water test centre

The existing concrete slab had been contaminated with crude oil and sea water over many years, so to start we used diamond grinders to remove the surface.

 

Once the surface preparation was complete a primer coat of solvent free high build epoxy was applied with a full broadcast of aggregate.

 

 

Stage 3 a single coat of Water base epoxy primer was applied to seal the aggregate

 

Stage 4 A top coat of Resbuild Ultracoat chemical resistant epoxy was applied along with Yellow LMP demarcations.

 

 



Polyurethane self level screed to bosch garage

 An old project but still going well after many years service

A typical garage floor

All the old coating was removed

All the cracks and repairs where done before applying epoxy primer

 

 The floor system specified was a 3mm polyurethane self smoothing screed

 

 

Epoxy sf coating to manufacturing workshop

Caravan Manufacturer ,                                                             Page 2

Stage one of three areas installing epoxy high build coating     

main area colour 00A05 Grey

 

walkways colour RAL 6002

 

Resbuild Solvent Free High Build Epoxy Coating

 

 

ooops ! unfortunately rain got in from under the shutters but this was quickly corrected

 

 

Final touches the yellow lines being marked out

 

 

 

 

Caravan Manufacturer , Stage one of three areas installing epoxy high build coating

 

Area One

 

Preparation

 

The original  floor had been coated many times and this was now worn and flaking off.   

Using our own grinding machines we removed all the old coating leaving a clean surface for the new coating

 

 

The original coating looking untidy and dirty

 

 

 

 

steel chequer plate  prepared using vonarx to remove coating and rust