2025 , Ten years on and returning to epoxy coating project
In 2015 Floor Painters Ltd was asked to provide a hard wearing floor system to the floor of a engineering workshop .
Unlike usual projects this workshop was on an island located off the Orkney Islands and part of an oil terminal complex .
To Floor Painters Ltd this was not a problem and we provided the customer with a hard wearing epoxy coating system.
Resin Building Products Ltd , Doncaster manufactured and supplied the materials .
The logistics involved was a challenge . getting materials, men and equipment to such a remote place but we achieved it and gave the customer exactly what they required .
Floor Specification was , preparation using industrial grinders both three phase and 110 volt machines . All grinders being used attached to three motor vacuum to remove the dust & debris .
Once preparation was complete our proposed system was , epoxy DPM primer coat , epoxy coating with full broadcast of emery aggregate . An water based epoxy to seal in this aggregate followed by a top coating of epoxy ultracoat ,chemical resistant coating all manufactured by Resin Building Products Ltd ,
http://resbuild.co.uk/ https://www.floorpaintersuk.co.uk/.
September 2025 return visit
We was asked to return to the island to refresh the original coating an carry out another project .
The original coating installed in 2015 was in very good condition considering this was a busy engineering workshop .
The only damage was from where a large piece of heavy equipment had been dragged accidently across a section of floor .
The all area was prepared once again using our three headed planetary grinder .
The original coating did not have to be removed just cleaned and abraded .
Once the preparation was completed we installed the same system like we did in 2015.
A big Thanks and credit to Resin Building Products Ltd and their staff for their support, the manufacture and supply of quality materials .
Floor Painters Ltd .
Our services
Floor preparation
We have a number of different size floor grinders , 110 volt and 3 phase machines . Fitted with the correct diamond tooling and attached to 3 motor industrial vacuums we carry out our own floor preparation
Part of this project was removing this hatched area installed recently by another contractor .
All the lines where different sizes , not very straight in places and not what the customer wanted .
Material used on this project was MMA manufactured and supplied by Resin Building Products Ltd
www.resbuild.co.uk
Resbuild MMA Colour Coat is a two pack, fast curing coating designed to provide a dust-free, seamless floor finish with protective and decorative properties. The inherent slip resistance of the coating may be enhanced by the incorporation of a suitable anti-slip dressing aggregate. Resbuild MMA Colour Coat allows a fast return to service.
With all the old coating removed we are now ready to apply a new hatched area .
WELCOME TO FLOOR PAINTERS LTD
Are you looking for a company to paint your floors, carry out repairs or just needing advice on a project that you are considering?
Floor Painters Ltd have the knowledge, skill and resources required to assist you in your search for information regarding what is available and suitable for your flooring requirements.
Epoxy Coatings and Screeds or Polyurethane Screeds and Coatings are just a few of the services our experienced installers carry out.
Call or email now to get advice or discuss your flooring requirements.
New website launched www.floorpaintersuk.co.uk
Floor Painters Ltd | Safe & Hygienic Floor Painting
