Installation of new drainage channel and polyurethane screed.

Our clients existing drainage channel and polyurethane screed, was showing signs of age and been damaged over the years. They decided it was time to remove the old and replace with new .

First job was  to build a protective screen to close the area off so that their production was able to continue.

We then removed the old screed back to the concrete sub-floor and removed the broken drainage channel.

Once the old screed and channel had been removed we then installed a new channel and built up the sub-screed with fall towards the new channel.



 

Finally we installed the new polyurethane screed and cove including new stainless steel trim to top of the cove.

 

 

 

The Finished Area.

 

 

 

 

To find a full range of our products and services please visit our website on the following link:

 

www.floorpainters.co.uk 

 

or contact us on the following email:

 

darren@floorpainters.co.uk

Copyright Floor Painters Limited 2016. All Rights Reserved.

 





Warehouse Demarcation Lines

Installation of Demarcation Lines to New Warehouse.

 

 

Our client was moving into a new warehouse and required demarcation lines to identify specific areas.

 

The current floor was a new polished concrete slab. To start all the lines where marked out and the slab was prepared by diamond grinding to achieve the required surface key.

 

 

 

Preparation

 

 

Sealing of Grinded Areas and installation of lines.

 

The grinded areas where the sealed using a clear epoxy resin. Once the clear areas had cured all demarcation lines where taped out with masking tape. A single coat of Epoxy line marking paint was the applied.

 

 

 

 

 

 

To find a full range of our products and services please visit our website on the following link:

 

www.floorpainters.co.uk 

 

or contact us on the following email:

 

darren@floorpainters.co.uk

Copyright Floor Painters Limited 2015. All Rights Reserved.

 

 



Refurbishment of Old Worn Floor

Refurbishment of Old Worn Floor

 

 

Our client asked us to refurbish there existing production unit floor. The floor was showing signs of age and had suffered UV damage over the years. We removed all contaminants from the surface by diamond grinding, before the application of Solvent Free high Build Epoxy coating and demarcation lines for each production path.

 

 

Before we started.

 

 

The Finished Refurbishment

 
 



To find a full range of our products and services please visit our website on the following link:

 

www.floorpainters.co.uk 

 

or contact us on the following email:

 

darren@floorpainters.co.uk

Copyright Floor Painters Limited 2015. All Rights Reserved.