Monday 15 February 2016

Warehouse safety signage

 

Our client operates a busy distribution warehouse, with a large fork truck traffic volume. They required some urgent safety signage to be installed to comply with health and safety, and to prevent any accidents.
 
Over a weekend we installed 12 large no stopping zones to all blind corners around the warehouse road ways.
 
Preparation:
 
The current surface where the signage was to be installed was polished concrete. So we had to grind the surface to remove and contaminants and achieve the required surface key. Once the preparation was complete the grinded concrete was sealed with a clear epoxy primer.
Preparation in progress.

The completed preparation.

Demarcation:

The next step once the primer had cured was to mask out the hash-box lines on the floor. Once this was complete a coat of Epoxy Line marking paint was applied.
Masking out the hash-box lines.

The Completed hash-box ready for the signage.

 
 Finishing Touches:

Finally the Safety signage was installed. Once the stencils where in places a coat of white epoxy line marking paint was applied.
One of the Completed no stopping Zones.




To find a full range of our products and services please visit our website on the following link:

 www.floorpaintersuk.co.uk 

 or contact us on the following email:

 darren@floorpainters.co.uk

 

Copyright Floor Painters Limited 2015. All Rights Reserved.


 
 

No comments:

Post a Comment